Hi! I am writing to explain how to test your network connection between your client (Windows or Linux) and another client (say, a remote server). The tool is
iperf version 3.
You can find some useful explanations and examples on this French site: https://iperf.fr/ But the version stays at 2 which does not have some amazing new features.
iperf3 you will not need to set parameters on the server side because the client will negotiate the parameters with the server.
Here are some useful examples you may want to test with
# Classic mode (10 seconds) iperf3 -c 10.10.10.1 -w 300k # 2 Connections iperf3 -c 10.10.10.1 -w 300k -P 2 # Transfer 10MB instead of 10 sec iperf3 -c 10.10.10.1 -w 300k -n10M
iperf3 for Windows
You may want to use the compiled binary on windows systems:
iperf3 for Linux
I don’t want to explain to much on how to install it for your Linux distribution. I believe you can find the right package. LOL
# Install iperf3 on CentOS 7 rpm -ivh http://mirror.as24220.net/pub/epel//7/x86_64/i/iperf3-3.0.10-1.el7.x86_64.rpm # Install iperf3 on CentOS 6 rpm -ivh http://dl.fedoraproject.org/pub/epel/6/x86_64/iperf3-3.0.10-1.el6.x86_64.rpm # Add firewall rules on both nodes iptables -A INPUT -i ppp+ -p tcp --dport 5201 -j ACCEPT
本文出自 Lesca 技术宅，转载时请注明出处及相应链接。